Wasp WPL 406 Manuel d'utilisateur télécharger pdf (Page 26)

WPL 406 User Manual

2.6.2 Loading the Fan-fold Label

Fan-fold media feeds through rear external label entrance chute.

1. Open the printer right side cover.

2. Push the print head release lever to open the print head mechanism.

3. Move the label roll guard horizontally to the end of label spindle then flip down the label roll

guard.

4. Remove the 3 inch core adapters from the media supply spindle.

5. Insert the fan-fold media through the rear external label entrance chute.

6. Pull fan-fold label leading edge forward through the media guide bar, media sensor and place

the label leading edge onto the platen roller.

7. Adjust the label roll guard and label guide by sliding to fit the paper width.

8. Close the print head mechanism making sure the latches are engaged securely.

9. Set the media sensor type and calibrate the selected sensor. (Please refer to section 4)

Note:

Please calibrate the gap/black mark sensor when changing media.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 82 83

Pas de commentaire

Wasp WPL 406 Manuel d'utilisateur Page 26